IP101G
Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.
What the IP101G family does
The IP101G is a single-port Fast Ethernet transceiver supporting 10/100 Mbps operations via MII, RMII, TP, or Fiber interfaces. Available in IP101GA, IP101GR, and IP101GRI variants, it covers commercial, industrial, and extended temperature ranges. It operates on a single 3.3V supply with a built-in regulator, consuming less than 0.15W at full load. The device features a 1.3 MHz gain bandwidth equivalent, supports jumbo frames up to 12KB, and includes auto MDI/MDIX. It is typically used in NAS, network printers, servers, IP phones, and smart TVs to connect LAN devices via Cat 5 cables or fiber optics.
IP101G datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| output voltage | 1.07 V | 1.1 V | 1.18 V | regout; DC Characteristics | IC Plus datasheet, p. 57 — Table 11 DC Characteristics |
| supply voltage range | 3.13 V | 3.3 V | 3.46 V | DC Characteristics | IC Plus datasheet, p. 57 — Table 11 DC Characteristics |
| operating temperature | 0 °C | — | 70 °C | IC Plus datasheet, p. 1 | |
| propagation delay | — | 80 ns | — | 100BASE-TX TX_EN Sampled to MDI Output assert, typical | IC Plus datasheet, p. 62 — Table 21 MDI to MII latency delay time |
| data rate | — | 100 bps | — | 10/100Mbps IEEE 802.3/802.3u compliant Fast Ethernet transceiver, 100Mbps and 10Mbps operations | IC Plus datasheet, p. 1 |
| rise time | — | — | 6 ns | tr; 7.2 DC Characteristics | IC Plus datasheet, p. 58 — 7.2 DC Characteristics |
| channel count | — | 1 | — | single-port Fast Ethernet Transceiver | IC Plus datasheet, p. 1 |