W25Q16JV
Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.
What the W25Q16JV family does
The W25Q16JVx is a 16-Mbit serial flash memory supporting dual and quad SPI modes for industrial and industrial plus grades. It operates on a single 3-V supply with a 100-MHz maximum clock speed and 1.6-Mbyte per second read rates. The device features 1.8-V to 3.6-V tolerance and includes block-level write protection. Engineers typically use this component for code storage, configuration data retention, and non-volatile parameter storage in embedded systems requiring high endurance and fast access times.
W25Q16JV-IQ datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| supply voltage range | 3 V | — | 3.6 V | fR = 50MHz; 10.2 Operating Ranges | Winbond datasheet, p. 58 — 10.2 Operating Ranges |
| operating temperature | -40 °C | — | 85 °C | Industrial; 10.2 Operating Ranges | Winbond datasheet, p. 58 — 10.2 Operating Ranges |
| clock frequency | — | — | 104 MHz | (03h); Note: | Winbond datasheet, p. 62 — Note: |
| standby current | — | 10 µA | 50 µA | /CS = VCC, VIN = GND or VCC; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| input capacitance | — | — | 6 pF | VIN = 0V; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| output capacitance | — | — | 8 pF | VOUT = 0V; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| rise time | — | — | 5 ns | 10.5 AC Measurement Conditions | Winbond datasheet, p. 61 — 10.5 AC Measurement Conditions |
| memory size | — | 16 Mbit | — | Winbond datasheet, p. 73 — W25Q16JV-IQ/JQ valid part numbers: | |
| data retention | — | 20 year | — | Winbond datasheet, p. 5 | |
| program erase cycles | — | 100 kcycle | — | Winbond datasheet, p. 5 | |
| page program time | — | 400 µs | 3 ms | page; winbond | Winbond datasheet, p. 63 — winbond |
| block erase time | — | 120 ms | 1.6 s | (32kb); winbond | Winbond datasheet, p. 63 — winbond |
| sector erase time | — | 45 ms | 400 ms | (4kb); winbond | Winbond datasheet, p. 63 — winbond |
| output voltage low | — | — | 200 mV | IOL = 100 µA; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| load capacitance | — | — | 30 pF | 10.5 AC Measurement Conditions | Winbond datasheet, p. 61 — 10.5 AC Measurement Conditions |
W25Q16JV-IQ frequently asked questions
What is the block erase time for the W25Q16JV-IQ?
The block erase time is 120 ms (32kb).
What is the clock frequency for the W25Q16JV-IQ when the Read Data Bytes command (03h) is used?
The clock frequency is 104 MHz.
What is the data retention period for the W25Q16JV-IQ?
The data retention period is 20 year.
What is the input capacitance of the W25Q16JV-IQ when VIN = 0V?
The input capacitance is 6 pF.
What is the load capacitance under 10.5 AC Measurement Conditions?
The load capacitance is 30 pF.
What is the memory size of the W25Q16JV-IQ?
The memory size is 16 Mbit.
What is the maximum operating temperature for the W25Q16JV-IQ under Industrial conditions?
The maximum operating temperature is 85 °C.
What is the output capacitance of the W25Q16JV-IQ?
The output capacitance is 8 pF at VOUT = 0V.
What is the output voltage low when IOL = 100 µA?
The output voltage low is 200 mV.
What is the page program time for the W25Q16JV-IQ?
The page program time is 400 µs.
What is the program erase cycle endurance for the W25Q16JV-IQ?
The program erase cycles are 100 kcycle.
What is the rise time under 10.5 AC Measurement Conditions?
The rise time is 5 ns under 10.5 AC Measurement Conditions.
W25Q16JV-JQ datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| supply voltage range | 3 V | — | 3.6 V | fR = 50MHz; 10.2 Operating Ranges | Winbond datasheet, p. 58 — 10.2 Operating Ranges |
| operating temperature | -40 °C | — | 85 °C | Industrial; 10.2 Operating Ranges | Winbond datasheet, p. 58 — 10.2 Operating Ranges |
| clock frequency | — | — | 104 MHz | (03h); Note: | Winbond datasheet, p. 62 — Note: |
| standby current | — | 10 µA | 50 µA | /CS = VCC, VIN = GND or VCC; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| input capacitance | — | — | 6 pF | VIN = 0V; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| output capacitance | — | — | 8 pF | VOUT = 0V; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| rise time | — | — | 5 ns | 10.5 AC Measurement Conditions | Winbond datasheet, p. 61 — 10.5 AC Measurement Conditions |
| memory size | — | 16 Mbit | — | Winbond datasheet, p. 73 — W25Q16JV-IQ/JQ valid part numbers: | |
| data retention | — | 20 year | — | Winbond datasheet, p. 5 | |
| program erase cycles | — | 100 kcycle | — | Winbond datasheet, p. 5 | |
| page program time | — | 400 µs | 3 ms | page; winbond | Winbond datasheet, p. 63 — winbond |
| block erase time | — | 120 ms | 1.6 s | (32kb); winbond | Winbond datasheet, p. 63 — winbond |
| sector erase time | — | 45 ms | 400 ms | (4kb); winbond | Winbond datasheet, p. 63 — winbond |
| output voltage low | — | — | 200 mV | IOL = 100 µA; 10.4 DC Electrical Characteristics- | Winbond datasheet, p. 60 — 10.4 DC Electrical Characteristics- |
| load capacitance | — | — | 30 pF | 10.5 AC Measurement Conditions | Winbond datasheet, p. 61 — 10.5 AC Measurement Conditions |
W25Q16JV-JQ frequently asked questions
What is the block erase time for 32kb blocks?
The block erase time is 120 ms.
What is the clock frequency for command 03h?
The clock frequency is 104 MHz.
What is the data retention period for the W25Q16JV-JQ?
The data retention is 20 year.
What is the input capacitance when VIN = 0V?
The input capacitance is 6 pF.
What is the load capacitance under 10.5 AC Measurement Conditions?
The load capacitance is 30 pF under 10.5 AC Measurement Conditions.
What is the memory size of the W25Q16JV-JQ?
The memory size is 16 Mbit.
What is the maximum operating temperature for the W25Q16JV-JQ under Industrial conditions as specified in section 10.2 Operating Ranges?
The maximum operating temperature is 85 °C.
What is the output capacitance when VOUT = 0V?
The output capacitance is 8 pF.
What is the maximum output voltage low when IOL = 100 µA?
The output voltage low is 200 mV when IOL = 100 µA.
What is the page program time for the W25Q16JV-JQ?
The page program time is 400 µs.
What is the program erase cycle endurance for the W25Q16JV-JQ?
The program erase cycle endurance is 100 kcycle.
What is the rise time under 10.5 AC Measurement Conditions?
The rise time is 5 ns.