MCP3002
Every spec below is cited to the manufacturer datasheet. Compare the closest alternatives, then ask the assistant what it means for your design.
What the MCP3002 does
The MCP3002 is a 10-bit successive approximation analog-to-digital converter featuring an on-board sample and hold circuit. It supports single-ended or pseudo-differential inputs and operates on a 2.7V to 5.5V single supply. The device achieves a maximum sampling rate of 200ksps at 5V with 10-bit resolution, ±1LSB maximum differential nonlinearity, and ±1LSB maximum integral nonlinearity. Low power CMOS technology enables a typical standby current of 5nA and active current of 375µA. Available in 8-pin MSOP, PDIP, SOIC, and TSSOP packages, the MCP3002 serves sensor interfaces, process control, data acquisition, and battery-operated systems across industrial temperature ranges.
Datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| supply voltage range | 2.7 V | — | 5.5 V | {dd}; ELECTRICAL CHARACTERISTICS | Microchip datasheet, p. 3 — ELECTRICAL CHARACTERISTICS (CONTINUED) |
| operating temperature | -40 °C | — | 85 °C | Temperature Ranges | Microchip datasheet, p. 4 — TEMPERATURE CHARACTERISTICS |
| adc resolution | — | 10 bit | — | Microchip datasheet, p. 2 — ELECTRICAL CHARACTERISTICS | |
| rise time | — | — | 100 ns | See Test Circuits, Figure 1-2Note 1; {out}; ELECTRICAL CHARACTERISTICS | Microchip datasheet, p. 3 — ELECTRICAL CHARACTERISTICS (CONTINUED) |
| fall time | — | — | 100 ns | See Test Circuits, Figure 1-2Note 1; {out}; ELECTRICAL CHARACTERISTICS | Microchip datasheet, p. 3 — ELECTRICAL CHARACTERISTICS (CONTINUED) |
| output voltage high | 4.1 V | — | — | IOH = -1mA, VDD = 4.5V; {oh}; ELECTRICAL CHARACTERISTICS | Microchip datasheet, p. 3 — ELECTRICAL CHARACTERISTICS (CONTINUED) |
| output voltage low | — | — | 400 mV | IOL = 1mA, VDD = 4.5V; {ol}; ELECTRICAL CHARACTERISTICS | Microchip datasheet, p. 3 — ELECTRICAL CHARACTERISTICS (CONTINUED) |
| sample rate | — | 200 Hz | — | V_DD = 5V, max throughput rate | Microchip datasheet, p. 2 — ELECTRICAL CHARACTERISTICS |
| channel count | — | 2 | — | Microchip datasheet, p. 12 — TABLE 3-1: PIN FUNCTION TABLE |
Closest matches to MCP3002
Frequently asked questions
What is the ADC resolution of the MCP3002?
The ADC resolution is 10 bit.
What is the channel count of the MCP3002?
The channel count is 2.
What is the fall time of the MCP3002?
The fall time is 100 ns, as specified in the Electrical Characteristics section under the condition 'See Test Circuits, Figure 1-2Note 1; {out}'.
What is the maximum operating temperature for the MCP3002?
The operating temperature is 85 °C under the Temperature Ranges condition.
What is the output voltage high?
The output voltage high is 4.1 V when IOH = -1mA and VDD = 4.5V.
What is the output voltage low specification for the MCP3002?
The output voltage low is 400 mV when IOL = 1mA and VDD = 4.5V.
What is the rise time under the conditions specified in Test Circuits, Figure 1-2Note 1 for the output?
The rise time is 100 ns.
What is the sample rate of the MCP3002 at V_DD = 5V with max throughput rate?
The sample rate is 200 Hz.
What is the supply voltage range for the MCP3002 under {dd} ELECTRICAL CHARACTERISTICS?
The supply voltage range is 5.5 V.