embedded processors controllers

CC2530F128

Every spec below is cited to the manufacturer datasheet. Compare the closest alternatives, then ask the assistant what it means for your design.

00 — Overview

What the CC2530F128 does

The CC2530Fx is a true system-on-chip solution for 2.4-GHz IEEE 802.15.4, ZigBee, and RF4CE applications. This family spans four flash memory variants: 32, 64, 128, and 256 KB. It combines an enhanced 8051 microcontroller with an integrated RF transceiver, offering a wide supply voltage range of 2V to 3.6V. The device supports active-mode currents as low as 24mA and power-down modes drawing 0.2mA or less. Engineers typically use these chips to build robust network nodes for home automation, lighting systems, and low-power wireless sensor networks while maintaining compliance with worldwide radio-frequency regulations.

Next step
Start building with CC2530F128 → Every number above is cited straight from the datasheet — ask what they mean for your design, and the assistant answers from the same source documents.
01 — Key specifications

Datasheet parameters

Datasheet parameters for CC2530F128
ParameterMinTypMaxConditionsSource
supply voltage range 4 mV COMPARATOR CHARACTERISTICS TI datasheet, p. 10 — COMPARATOR CHARACTERISTICS
input offset voltage 40 µV TEST CONDITIONS TI datasheet, p. 10 — OP-AMP CHARACTERISTICS
operating temperature -40 °C 125 °C RECOMMENDED OPERATING CONDITIONS TI datasheet, p. 4 — RECOMMENDED OPERATING CONDITIONS
operating frequency 4 MHz Master, RX and TX; TA = -40 °C to 125 °C, VDD = 2 V to 5.5 V TI datasheet, p. 13 — SPI AC CHARACTERISTICS
sensitivity -97 dBm PER = 1%, as specified by [1][1] requires -85 dBm; receiver; RF RECEIVE SECTION TI datasheet, p. 6 — RF RECEIVE SECTION
cpu speed 32 MHz TI datasheet, p. 8 — 32-MHz CRYSTAL OSCILLATOR
program memory size 125 KB TI datasheet, p. 2
ram size 7.81 KB TI datasheet, p. 1
io count 21 TI datasheet, p. 1
adc resolution 12 bit TI datasheet, p. 1
core size 8 bit TI datasheet, p. 20
load capacitance 12 pF 16 pF crystal; 32.768-kHz CRYSTAL OSCILLATOR TI datasheet, p. 8 — 32.768-kHz CRYSTAL OSCILLATOR
02 — Alternatives

Closest matches to CC2530F128

CH32V203C6T6 13.4× lower slew rate, 4.5× higher cpu speed, 4.0× higher core size
EZR32HG220 7.5× higher input offset voltage, 4.4× higher output power, 4.0× higher core size
EZR32HG220F32R55G 7.5× higher input offset voltage, 4.4× higher output power, 4.0× higher core size
MSP430FR2310 12.0× lower load capacitance, 4.0× lower ram size, 2.2× lower quiescent current
CC1110F16RHHR 8.0× lower program memory size, 4.0× lower ram size, 2.2× higher output power
PIC16LF1824 15.6× lower program memory size, 2.7× higher clock frequency, 1.8× lower cmrr
EFM8BB10F2A-A-QFN20 5.1× higher quiescent current, 1.9× lower operating temperature, 1.3× lower cmrr
MSP430FR2433IRGE 12.0× lower load capacitance, 8.3× lower program memory size, 2.2× lower quiescent current
03 — FAQ

Frequently asked questions

What is the ADC resolution of the CC2530F128?

The ADC resolution is 12 bit.

What is the core size of the CC2530F128?

The core size is 8 bit.

What is the CPU speed of the CC2530F128?

The CPU speed is 32 MHz.

What is the input offset voltage under TEST CONDITIONS?

The input offset voltage is 40 µV under TEST CONDITIONS.

How many I/O pins does the CC2530F128 have?

The CC2530F128 has 21 I/O pins.

What is the load capacitance for the 32.768-kHz CRYSTAL OSCILLATOR?

The load capacitance is 12 pF.

What is the operating frequency for the CC2530F128 in Master, RX and TX mode?

The operating frequency is 4 MHz when TA = -40 °C to 125 °C and VDD = 2 V to 5.5 V.

What is the maximum operating temperature for the CC2530F128 under RECOMMENDED OPERATING CONDITIONS?

The maximum operating temperature is 125 °C.

What is the program memory size of the CC2530F128?

The program memory size is 125 KB.

What is the RAM size of the CC2530F128?

The RAM size is 7.81 KB.

What is the receiver sensitivity for the CC2530F128 under the condition of PER = 1%?

The sensitivity is -97 dBm.

What is the supply voltage range for the CC2530F128 under COMPARATOR CHARACTERISTICS?

The supply voltage range is 4 mV.

Design help What do I need around the CC2530F128? →