sensors

CC6207M

Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.

00 — Overview

What the CC6207M family does

The CC6207M is a low-power, high-sensitivity bipolar Hall effect switch with a latch output. It operates across a 2 to 5 V supply range and supports a maximum switching frequency of 32 Hz. The device features an ESD rating of 6000 V (HBM) and functions across a wide temperature range of -40 to 125°C. Available in SOT23-3, TO-92S, and DFN4L packages, it eliminates the need for magnetic pole identification during assembly. Engineers typically use this component in portable electronics like mobile phones, cordless phones, and laptops, as well as in instruments and PDAs where reliable magnetic detection is required.

Next step
Start building with CC6207M → Every number above is cited straight from the datasheet — ask what they mean for your design, and the assistant answers from the same source documents.
01 — Key specifications

CC6207M datasheet parameters

ParameterMinTypMaxConditionsSource
supply voltage range 2 V — 5 V CrossChipMicro datasheet, p. 1
operating temperature -40 °C — 125 °C CrossChipMicro datasheet, p. 1
sample rate — 32 Hz — CrossChipMicro datasheet, p. 1
03 — Alternatives

Closest matches to CC6207M

HAL2041 1.6× lower sample rate, 1.3× higher operating temperature, 1.1× higher supply voltage range
HAL248G similar supply voltage range, similar sample rate, similar operating temperature
MT8631 1.6× lower sample rate, similar supply voltage range, similar operating temperature
CC6103E 1.9× lower operating temperature, 1.1× higher supply voltage range
DRV5055 1.1× lower supply voltage range, similar operating temperature
LIS3MDL 15.6× higher sample rate, 1.9× lower operating temperature, 1.3× lower supply voltage range
MMC5603NJ 19.6× higher sample rate, 1.9× lower supply voltage range, 1.9× lower operating temperature
SM351LT 3.2× lower sample rate, 1.9× lower supply voltage range, 1.9× lower operating temperature
Design help What do I need around the CC6207M? →