TL084
Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.
What the TL084 family does
The TL084I, TL084AI, TL084BI, TL084C, TL084AC, and TL084BC are high-speed, JFET input, quad operational amplifiers. These devices feature a wide common-mode voltage range extending to the positive supply, low input bias and offset currents, and internal frequency compensation. The family offers high slew rates of 16 V/µs and output short-circuit protection. They are available in commercial, industrial, and military temperature grades. Engineers typically use these amplifiers in general-purpose applications requiring high input impedance and low offset voltage. The parts operate on single supplies from 3 to 30 V and maintain a low quiescent current of 375 µA per amplifier.
TL084C datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.4 mA | — | icc; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| supply voltage range (abs max) | -18 V | — | 18 V | vcc; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset voltage drift | — | 10 µV/°C | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input offset voltage | — | 3 mV | 1.01 V | vio; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| gain bandwidth | 2.5 MHz | 4 MHz | — | gbp{ khz}; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 6 — Table 3. , (unless otherwise specified) (continued) |
| cmrr | — | 86 dB | — | V_CC = ±15 V, typical at T_amb = 25 °C (from CMRR vs. free air temp. curve) | ST datasheet, p. 9 |
| operating temperature (abs max) | 0 °C | — | 70 °C | toper; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| power dissipation (abs max) | — | — | 680 mW | ptot; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset current | — | 5 pA | 1 nA | iio; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input bias current | — | 30 pA | 20 nA | iib; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| slew rate | 8 V/µs | 16 V/µs | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| psrr | — | 86 dB | — | Supply voltage rejection ratio (SVR), R_S = 50 Ω, T_amb = +25 °C, typical | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input voltage noise density | — | 14 nV/√Hz | — | Equivalent input noise voltage, R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, T_amb = +25 °C | ST datasheet, p. 9 |
| response time | — | 100 ns | — | Rise time, V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, unity gain, typical | ST datasheet, p. 6 — Table 3. , (unless otherwise specified) (continued) |
| settling time | — | 300 ns | — | Output voltage vs. elapsed time curve, V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, output settles to 20 mV steady state | ST datasheet, p. 9 |
| channel count | — | 4 | — | ST datasheet, p. 1 |
TL084C frequently asked questions
What is the channel count of the TL084C?
The channel count is 4.
What is the common-mode rejection ratio (CMRR) of the TL084C?
The CMRR is 86 dB at V_CC = ±15 V, typical at T_amb = 25 °C (from CMRR vs. free air temp. curve).
What is the gain bandwidth product (GBP) of the TL084C under the conditions of VCC = ±15 V and Tamb = +25 °C?
The gain bandwidth product is 4 MHz.
What is the input bias current (iib) for the TL084C at Tamb = +25 °C with VCC = ±15 V?
The input bias current is 30 pA.
What is the input offset current (iio) for the TL084C at VCC = ±15 V and Tamb = +25 °C?
The input offset current (iio) is 5 pA.
What is the input offset voltage (vio) when VCC = ±15 V and Tamb = +25 °C?
The input offset voltage is 3 mV.
What is the input offset voltage drift for the TL084C?
The input offset voltage drift is 10 µV/°C at VCC = ±15 V and Tamb = +25 °C (unless otherwise specified).
What is the input voltage noise density of the TL084C?
The input voltage noise density is 14 nV/√Hz at an equivalent input noise voltage with R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, and T_amb = +25 °C.
What is the absolute maximum operating temperature for the TL084C?
The absolute maximum operating temperature (toper) is 70 °C.
What is the total power dissipation (ptot) under absolute maximum ratings?
The total power dissipation (ptot) under absolute maximum ratings is 680 mW.
What is the typical supply voltage rejection ratio (SVR) when R_S = 50 Ω and T_amb = +25 °C?
The typical supply voltage rejection ratio (SVR) is 86 dB when R_S = 50 Ω and T_amb = +25 °C.
What is the quiescent current (icc) of the TL084C at VCC = ±15 V and Tamb = +25 °C?
The quiescent current is 1.4 mA.
TL084I datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.4 mA | — | icc; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| supply voltage range (abs max) | 6 V | — | 36 V | vcc; 2 Absolute maximum ratings and operating conditions | ST datasheet, p. 4 — 2 Absolute maximum ratings and operating conditions |
| input offset voltage drift | — | 10 µV/°C | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| gain bandwidth | 2.5 MHz | 4 MHz | — | gbp{ khz}; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 6 — Table 3. , (unless otherwise specified) (continued) |
| cmrr | — | 86 dB | — | V_CC = ±15 V, typical at T_amb = 25 °C (from CMRR vs. free air temp. curve) | ST datasheet, p. 9 |
| operating temperature (abs max) | 0 °C | — | 70 °C | toper; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| power dissipation (abs max) | — | — | 680 mW | ptot; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset current | — | 5 pA | 1 nA | iio; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input bias current | — | 20 pA | 20 nA | iib; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| slew rate | 8 V/µs | 16 V/µs | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| psrr | — | 86 dB | — | Supply voltage rejection ratio (SVR), R_S = 50 Ω, T_amb = +25 °C, typical | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input voltage noise density | — | 14 nV/√Hz | — | Equivalent input noise voltage, R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, T_amb = +25 °C | ST datasheet, p. 9 |
| response time | — | 100 ns | — | Rise time, V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, unity gain, typical | ST datasheet, p. 6 — Table 3. , (unless otherwise specified) (continued) |
| settling time | — | 300 ns | — | Output voltage vs. elapsed time curve, V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, output settles to 20 mV steady state | ST datasheet, p. 9 |
| channel count | — | 4 | — | ST datasheet, p. 1 |
TL084I frequently asked questions
What is the channel count of the TL084I?
The channel count is 4.
What is the typical CMRR of the TL084I at T_amb = 25 °C with V_CC = ±15 V?
The typical CMRR is 86 dB at T_amb = 25 °C with V_CC = ±15 V.
What is the gain bandwidth product of the TL084I?
The gain bandwidth product is 4 MHz at VCC = ±15 V and Tamb = +25 °C.
What is the input bias current (iib) for the TL084I at VCC = ± 15 V and Tamb = +25 °C?
The input bias current is 20 pA.
What is the input offset current (iio) for the TL084I?
The input offset current is 5 pA at VCC = ±15 V and Tamb = +25 °C.
What is the input offset voltage drift for the TL084I?
The input offset voltage drift is 10 µV/°C at VCC = ±15 V and Tamb = +25 °C (unless otherwise specified).
What is the input voltage noise density of the TL084I?
The equivalent input noise voltage is 14 nV/√Hz at R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, and T_amb = +25 °C.
What is the absolute maximum operating temperature for the TL084I?
The operating temperature is 70 °C toper; Absolute maximum ratings.
What is the total power dissipation (ptot) under absolute maximum ratings?
The total power dissipation (ptot) under absolute maximum ratings is 680 mW.
What is the typical supply voltage rejection ratio (SVR) when R_S = 50 Ω and T_amb = +25 °C?
The typical supply voltage rejection ratio (SVR) is 86 dB when R_S = 50 Ω and T_amb = +25 °C.
What is the quiescent current (icc) of the TL084I at VCC = ±15 V and Tamb = +25 °C?
The quiescent current is 1.4 mA.
What is the typical rise time of the TL084I under the conditions of V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, and unity gain?
The typical rise time is 100 ns.
TL084AC datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.4 mA | — | icc; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| supply voltage range (abs max) | -18 V | — | 18 V | vcc; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset voltage drift | — | 10 µV/°C | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| cmrr | — | 86 dB | — | V_CC = ±15 V, typical at T_amb = 25 °C (from CMRR vs. free air temp. curve) | ST datasheet, p. 9 |
| operating temperature (abs max) | 0 °C | — | 70 °C | toper; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| power dissipation (abs max) | — | — | 680 mW | ptot; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset current | — | 5 pA | 1 nA | iio; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input bias current | — | 20 pA | 20 nA | iib; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| slew rate | 8 V/µs | 16 V/µs | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| psrr | — | 86 dB | — | Supply voltage rejection ratio (SVR), R_S = 50 Ω, T_amb = +25 °C, typical | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input voltage noise density | — | 14 nV/√Hz | — | Equivalent input noise voltage, R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, T_amb = +25 °C | ST datasheet, p. 9 |
| response time | — | 100 ns | — | Rise time, V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, unity gain, typical | ST datasheet, p. 6 — Table 3. , (unless otherwise specified) (continued) |
| settling time | — | 300 ns | — | Output voltage vs. elapsed time curve, V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, output settles to 20 mV steady state | ST datasheet, p. 9 |
| channel count | — | 4 | — | ST datasheet, p. 1 |
TL084AC frequently asked questions
How many channels does the TL084AC have?
The TL084AC has 4 channels.
What is the typical CMRR of the TL084AC at T_amb = 25 °C with V_CC = ±15 V?
The typical CMRR is 86 dB at T_amb = 25 °C with V_CC = ±15 V.
What is the input bias current (iib) for the TL084AC?
The input bias current is 20 pA at VCC = ±15 V and Tamb = +25 °C.
What is the input offset current (iio) when VCC = ±15 V and Tamb = +25 °C?
The input offset current is 5 pA.
What is the input offset voltage drift for the TL084AC?
The input offset voltage drift is 10 µV/°C at VCC = ±15 V and Tamb = +25 °C (unless otherwise specified).
What is the equivalent input noise voltage of the TL084AC?
The input voltage noise density is 14 nV/√Hz at R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, and T_amb = +25 °C.
What is the absolute maximum operating temperature for the TL084AC?
The operating temperature is 70 °C toper.
What is the maximum power dissipation (ptot) for the TL084AC?
The absolute maximum power dissipation (ptot) is 680 mW.
What is the typical supply voltage rejection ratio (SVR) when R_S = 50 Ω and T_amb = +25 °C?
The typical supply voltage rejection ratio (SVR) is 86 dB when R_S = 50 Ω and T_amb = +25 °C.
What is the quiescent current (icc) of the TL084AC at VCC = ±15 V and Tamb = +25 °C?
The quiescent current is 1.4 mA.
What is the typical rise time of the TL084AC under the conditions of V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, and unity gain?
The typical rise time is 100 ns.
What is the settling time for the TL084AC under the condition of an output voltage vs. elapsed time curve with V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, and output settling to 20 mV steady state?
The settling time is 300 ns.
TL084AI datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.4 mA | — | icc; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| supply voltage range (abs max) | 6 V | — | 36 V | vcc; 2 Absolute maximum ratings and operating conditions | ST datasheet, p. 4 — 2 Absolute maximum ratings and operating conditions |
| input offset voltage drift | — | 10 µV/°C | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| cmrr | — | 86 dB | — | V_CC = ±15 V, typical at T_amb = 25 °C (from CMRR vs. free air temp. curve) | ST datasheet, p. 9 |
| operating temperature (abs max) | 0 °C | — | 70 °C | toper; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| power dissipation (abs max) | — | — | 680 mW | ptot; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset current | — | 5 pA | 1 nA | iio; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input bias current | — | 20 pA | 20 nA | iib; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| slew rate | 8 V/µs | 16 V/µs | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| psrr | — | 86 dB | — | Supply voltage rejection ratio (SVR), R_S = 50 Ω, T_amb = +25 °C, typical | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input voltage noise density | — | 14 nV/√Hz | — | Equivalent input noise voltage, R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, T_amb = +25 °C | ST datasheet, p. 9 |
| response time | — | 100 ns | — | Rise time, V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, unity gain, typical | ST datasheet, p. 6 — Table 3. , (unless otherwise specified) (continued) |
| settling time | — | 300 ns | — | Output voltage vs. elapsed time curve, V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, output settles to 20 mV steady state | ST datasheet, p. 9 |
| channel count | — | 4 | — | ST datasheet, p. 1 |
TL084AI frequently asked questions
How many channels does the TL084AI have?
The TL084AI has a channel count of 4.
What is the typical Common-Mode Rejection Ratio (CMRR) of the TL084AI?
The typical CMRR is 86 dB at V_CC = ±15 V and T_amb = 25 °C.
What is the input bias current (iib) for the TL084AI at VCC = ±15 V and Tamb = +25 °C?
The input bias current is 20 pA.
What is the input offset current (iio) for the TL084AI at VCC = ±15 V and Tamb = +25 °C?
The input offset current (iio) is 5 pA.
What is the input offset voltage drift for the TL084AI?
The input offset voltage drift is 10 µV/°C at VCC = ±15 V and Tamb = +25 °C (unless otherwise specified).
What is the input voltage noise density of the TL084AI?
The input voltage noise density is 14 nV/√Hz at an equivalent input noise voltage with R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, and T_amb = +25 °C.
What is the absolute maximum operating temperature (toper) for the TL084AI?
The absolute maximum operating temperature (toper) is 70 °C.
What is the total power dissipation (ptot) under Absolute maximum ratings?
The total power dissipation (ptot) under Absolute maximum ratings is 680 mW.
What is the typical supply voltage rejection ratio (SVR) when R_S = 50 Ω and T_amb = +25 °C?
The typical supply voltage rejection ratio (SVR) is 86 dB when R_S = 50 Ω and T_amb = +25 °C.
What is the quiescent current (icc) of the TL084AI at $ VCC = ± 15 V $ and $ Tamb = +25 ^{ }°C $?
The quiescent current is 1.4 mA.
What is the typical rise time of the TL084AI when V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, and unity gain?
The typical rise time is 100 ns.
What is the settling time of the TL084AI under the condition of an output voltage vs. elapsed time curve with V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, and output settling to 20 mV steady state?
The settling time is 300 ns.
TL084BC datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.4 mA | — | icc; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| supply voltage range (abs max) | -18 V | — | 18 V | vcc; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset voltage drift | — | 10 µV/°C | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| cmrr | — | 86 dB | — | V_CC = ±15 V, typical at T_amb = 25 °C (from CMRR vs. free air temp. curve) | ST datasheet, p. 9 |
| operating temperature (abs max) | 0 °C | — | 70 °C | toper; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| power dissipation (abs max) | — | — | 680 mW | ptot; Absolute maximum ratings | ST datasheet, p. 4 — Table 1. Absolute maximum ratings |
| input offset current | — | 5 pA | 1 nA | iio; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input bias current | — | 20 pA | 20 nA | iib; $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| slew rate | 8 V/µs | 16 V/µs | — | $ VCC = \pm 15 \, V $, $ Tamb = +25 \, ^{\circ}C $ (unless otherwise specified) | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| psrr | — | 86 dB | — | Supply voltage rejection ratio (SVR), R_S = 50 Ω, T_amb = +25 °C, typical | ST datasheet, p. 5 — Table 3. , (unless otherwise specified) |
| input voltage noise density | — | 14 nV/√Hz | — | Equivalent input noise voltage, R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, T_amb = +25 °C | ST datasheet, p. 9 |
| response time | — | 100 ns | — | Rise time, V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, unity gain, typical | ST datasheet, p. 6 — Table 3. , (unless otherwise specified) (continued) |
| settling time | — | 300 ns | — | Output voltage vs. elapsed time curve, V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, output settles to 20 mV steady state | ST datasheet, p. 9 |
| channel count | — | 4 | — | ST datasheet, p. 1 |
TL084BC frequently asked questions
How many channels does the TL084BC have?
The TL084BC has 4 channels.
What is the typical Common-Mode Rejection Ratio (CMRR) of the TL084BC?
The typical CMRR is 86 dB at V_CC = ±15 V and T_amb = 25 °C.
What is the input bias current (iib) for the TL084BC at VCC = ±15 V and Tamb = +25 °C?
The input bias current (iib) is 20 pA.
What is the input offset current (iio) for the TL084BC at VCC = ±15 V and Tamb = +25 °C?
The input offset current (iio) is 5 pA.
What is the input offset voltage drift for the TL084BC under the condition that $ VCC = ± 15 V $ and $ Tamb = +25 ^{°}C $ (unless otherwise specified)?
The input offset voltage drift is 10 µV/°C.
What is the input voltage noise density of the TL084BC?
The input voltage noise density is 14 nV/√Hz at an equivalent input noise voltage with R_S = 100 Ω, f = 1 kHz, V_CC = ±15 V, and T_amb = +25 °C.
What is the maximum operating temperature (toper) according to the absolute maximum ratings?
The maximum operating temperature (toper) is 70 °C.
What is the total power dissipation (ptot) under Absolute maximum ratings?
The total power dissipation (ptot) is 680 mW.
What is the typical Supply voltage rejection ratio (SVR) when R_S = 50 Ω and T_amb = +25 °C?
The typical Supply voltage rejection ratio (SVR) is 86 dB when R_S = 50 Ω and T_amb = +25 °C.
What is the quiescent current (icc) of the TL084BC at VCC = ±15 V and Tamb = +25 °C?
The quiescent current is 1.4 mA.
What is the typical rise time of the TL084BC when V_in = 20 mV, R_L = 2 kΩ, C_L = 100 pF, and unity gain?
The typical rise time is 100 ns.
What is the settling time of the TL084BC under the condition of an output voltage vs. elapsed time curve with V_CC = ±15 V, R_L = 2 kΩ, T_amb = +25 °C, and output settling to 20 mV steady state?
The settling time is 300 ns.