TL071H
Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.
What the TL071H family does
The TL07xx family comprises low-noise, FET-input operational amplifiers available as single, dual, and quad configurations. These devices span the TL071, TL072, and TL074 variants across commercial, industrial, and extended military temperature grades. They feature a high slew rate of 20V/μs, a low offset voltage of 1mV, and low power consumption of 940μA per channel. The family supports wide supply voltages from 4.5V to 40V and includes integrated EMI and RF filters. Engineers typically use these amplifiers in solar energy inverters, motor drive controls, UPS systems, and professional audio mixers.
TL071H datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 938 µA | 1.12 mA | IO = 0 A; TA = -40°C to +125°C; iq; POWER SUPPLY | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| output current | — | 26 mA | — | isc; OUTPUT | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| supply voltage range | 10 V | — | 30 V | All NS and PS packages; All TL07xM devices(1); vs(vcc-); over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| abs max current (abs max) | -10 mA | — | 10 mA | TI datasheet, p. 10 — 5.1 Absolute Maximum Ratings | |
| input offset voltage drift | — | 2 µV/°C | — | TA = -40°C to +125°C; OFFSET VOLTAGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input offset voltage | — | 1 µV | 10 µV | TA = -40°C to +125°C; psrr; OFFSET VOLTAGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| gain bandwidth | — | 5.25 MHz | — | gbw; FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| cmrr | 100 dB | 105 dB | — | TA = -40°C to +125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| operating temperature | -55 °C | — | 125 °C | TL07xM; ta; over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| input offset current | — | 500 fA | 120 pA | ios; INPUT BIAS CURRENT | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input bias current | — | 1 pA | 120 pA | ib; INPUT BIAS CURRENT | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| slew rate | — | 20 V/µs | — | FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| psrr | — | 120 dB | — | VS = 5 V to 40 V, VCM = VS/2, TA = -40 to +125 C, typ 1 uV/V | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input voltage noise density | — | 37 nV/√Hz | — | en; NOISE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| response time | — | 60 µs | — | Turn-on time, T_A = 25 °C, V_S = 40 V | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| settling time | — | 630 ns | — | ts; FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| channel count | — | 1 | — | TI datasheet, p. 1 — Device Information |
TL071H frequently asked questions
What is the absolute maximum current rating for the TL071H?
The absolute maximum current is 10 mA.
How many channels does the TL071H have?
The TL071H has 1 channel.
What is the CMRR for the TL071H when the input voltage range is considered and TA = -40°C to +125°C?
The CMRR is 105 dB when TA = -40°C to +125°C and the input voltage range is considered.
What is the gain bandwidth of the TL071H?
The gain bandwidth is 5.25 MHz under the condition gbw; FREQUENCY RESPONSE.
What is the input bias current (ib) for the TL071H?
The input bias current (ib) is 1 pA.
What is the input offset current (ios) under the condition of input bias current?
The input offset current (ios) is 500 fA.
What is the input offset voltage for the TL071H at TA = -40°C to +125°C under psrr; OFFSET VOLTAGE conditions?
The input offset voltage is 1 µV.
What is the input offset voltage drift for the TL071H when the temperature ranges from -40°C to +125°C?
The input offset voltage drift is 2 µV/°C.
What is the input voltage noise density (en) under NOISE conditions?
The input voltage noise density (en) under NOISE conditions is 37 nV/√Hz.
What is the maximum operating temperature for the TL07xM under ambient temperature conditions?
The maximum operating temperature is 125 °C for the TL07xM under ambient temperature conditions (ta) within the over operating ambient temperature range (unless otherwise noted).
What is the output current (isc; OUTPUT) for the TL071H?
The output current (isc; OUTPUT) for the TL071H is 26 mA.
What is the typical PSRR of the TL071H when VS = 5 V to 40 V, VCM = VS/2, and TA = -40 to +125 C?
The typical PSRR is 120 dB (1 uV/V) under the conditions VS = 5 V to 40 V, VCM = VS/2, and TA = -40 to +125 C.
TL072H datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 938 µA | 1.12 mA | IO = 0 A; TA = -40°C to +125°C; iq; POWER SUPPLY | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| output current | — | 26 mA | — | isc; OUTPUT | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| supply voltage range | 10 V | — | 30 V | All NS and PS packages; All TL07xM devices(1); vs(vcc-); over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| abs max current (abs max) | -10 mA | — | 10 mA | TI datasheet, p. 10 — 5.1 Absolute Maximum Ratings | |
| input offset voltage drift | — | 2 µV/°C | — | TA = -40°C to +125°C; OFFSET VOLTAGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input offset voltage | — | 1 µV | 10 µV | TA = -40°C to +125°C; psrr; OFFSET VOLTAGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| gain bandwidth | — | 5.25 MHz | — | gbw; FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| cmrr | 100 dB | 105 dB | — | TA = -40°C to +125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| operating temperature | -55 °C | — | 125 °C | TL07xM; ta; over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| input offset current | — | 500 fA | 120 pA | ios; INPUT BIAS CURRENT | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input bias current | — | 1 pA | 120 pA | ib; INPUT BIAS CURRENT | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| slew rate | — | 20 V/µs | — | FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| psrr | — | 120 dB | — | VS = 5 V to 40 V, VCM = VS/2, TA = -40 to +125 C, typ 1 uV/V | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input voltage noise density | — | 37 nV/√Hz | — | en; NOISE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| response time | — | 60 µs | — | Turn-on time, T_A = 25 °C, V_S = 40 V | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| settling time | — | 630 ns | — | ts; FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| channel count | — | 2 | — | TI datasheet, p. 1 — Device Information |
TL072H frequently asked questions
What is the absolute maximum current rating for the TL072H?
The absolute maximum current is 10 mA.
What is the channel count of the TL072H?
The channel count is 2.
What is the CMRR for the TL072H when the input voltage range is considered and TA = -40°C to +125°C?
The CMRR is 105 dB when TA = -40°C to +125°C and the input voltage range is considered.
What is the gain bandwidth product of the TL072H under FREQUENCY RESPONSE conditions?
The gain bandwidth product is 5.25 MHz.
What is the input bias current (ib) for the TL072H?
The input bias current (ib) is 1 pA.
What is the input offset current (ios) for the TL072H under the condition of input bias current?
The input offset current (ios) is 500 fA.
What is the input offset voltage of the TL072H at TA = -40°C to +125°C under psrr OFFSET VOLTAGE conditions?
The input offset voltage is 1 µV.
What is the input offset voltage drift for the TL072H when the temperature is between -40°C and +125°C?
The input offset voltage drift is 2 µV/°C.
What is the input voltage noise density (en) under NOISE conditions?
The input voltage noise density (en) under NOISE conditions is 37 nV/√Hz.
What is the maximum operating temperature for the TL072H under the condition TL07xM; ta; over operating ambient temperature range (unless otherwise noted)?
The operating temperature is 125 °C.
What is the output current (isc; OUTPUT) for the TL072H?
The output current (isc; OUTPUT) for the TL072H is 26 mA.
What is the typical PSRR of the TL072H when VS = 5 V to 40 V, VCM = VS/2, and TA = -40 to +125 C?
The typical PSRR is 120 dB.
TL072M datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.4 mA | 2.5 mA | iq | TI datasheet, p. 16 |
| supply voltage range | 10 V | — | 30 V | All NS and PS packages; All TL07xM devices(1); vs(vcc-); over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| abs max current (abs max) | -10 mA | — | 10 mA | TI datasheet, p. 10 — 5.1 Absolute Maximum Ratings | |
| input offset voltage drift | — | 2 µV/°C | — | TI datasheet, p. 1 | |
| cmrr | — | 86 dB | — | V_CC = ±15 V, R_L = 10 kΩ, T_A = 25 °C (typical curve) | TI datasheet, p. 25 |
| operating temperature | -55 °C | — | 125 °C | TL07xM; ta; over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| input bias current | — | 80 pA | — | T_A = 25 °C (typical curve) | TI datasheet, p. 24 |
| slew rate | 5 V/µs | 20 V/µs | — | VI = 10 V, CL = 100 pF, RL = 2 kΩ; TL07xM; AC | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| input voltage noise density | — | 18 nV/√Hz | — | All PS and NS packages, all TL07xM devices; RS = 20 Ω, f = 1 kHz; en; AC | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| response time | — | 100 ns | — | Settling time, VI = 20 V, CL = 100 pF, RL = 2 kOhm | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| settling time | — | 100 ns | — | VI = 20 V, CL = 100 pF, RL = 2 kΩ; ts; AC | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| channel count | — | 2 | — | TI datasheet, p. 1 — Device Information |
TL072M frequently asked questions
What is the absolute maximum current rating for the TL072M?
The absolute maximum current is 10 mA.
What is the channel count of the TL072M?
The channel count is 2.
What is the common-mode rejection ratio (CMRR) of the TL072M?
The CMRR is 86 dB at V_CC = ±15 V, R_L = 10 kΩ, and T_A = 25 °C.
What is the typical input bias current of the TL072M at T_A = 25 °C?
The typical input bias current is 80 pA at T_A = 25 °C.
What is the input offset voltage drift for the TL072M?
The input offset voltage drift is 2 µV/°C.
What is the input voltage noise density for all PS and NS packages and all TL07xM devices with RS = 20 Ω at f = 1 kHz?
The input voltage noise density is 18 nV/√Hz.
What is the maximum operating temperature for the TL072M?
The operating temperature is 125 °C for the TL07xM at ta over the operating ambient temperature range (unless otherwise noted).
What is the quiescent current (iq) of the TL072M?
The quiescent current (iq) is 1.4 mA.
What is the response time of the TL072M when the input voltage is 20 V, the load capacitance is 100 pF, and the load resistance is 2 kOhm?
The response time is 100 ns.
What is the settling time of the TL072M under the conditions of VI = 20 V, CL = 100 pF, RL = 2 kΩ, ts; AC?
The settling time is 100 ns.
What is the slew rate of the TL072M when VI = 10 V, CL = 100 pF, and RL = 2 kΩ?
The slew rate is 20 V/µs.
What is the supply voltage range for all NS and PS packages and all TL07xM devices over the operating ambient temperature range?
The supply voltage range is 30 V vs(vcc-).
TL074H datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 938 µA | 1.12 mA | IO = 0 A; TA = -40°C to +125°C; iq; POWER SUPPLY | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| output current | — | 26 mA | — | isc; OUTPUT | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| supply voltage range | 10 V | — | 30 V | All NS and PS packages; All TL07xM devices(1); vs(vcc-); over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| abs max current (abs max) | -10 mA | — | 10 mA | TI datasheet, p. 10 — 5.1 Absolute Maximum Ratings | |
| input offset voltage drift | — | 2 µV/°C | — | TA = -40°C to +125°C; OFFSET VOLTAGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input offset voltage | — | 1 µV | 10 µV | TA = -40°C to +125°C; psrr; OFFSET VOLTAGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| gain bandwidth | — | 5.25 MHz | — | gbw; FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| cmrr | 100 dB | 105 dB | — | TA = -40°C to +125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| operating temperature | -55 °C | — | 125 °C | TL07xM; ta; over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| input offset current | — | 500 fA | 120 pA | ios; INPUT BIAS CURRENT | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input bias current | — | 1 pA | 120 pA | ib; INPUT BIAS CURRENT | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| slew rate | — | 20 V/µs | — | FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| psrr | — | 120 dB | — | VS = 5 V to 40 V, VCM = VS/2, TA = -40 to +125 C, typ 1 uV/V | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| input voltage noise density | — | 37 nV/√Hz | — | en; NOISE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| response time | — | 60 µs | — | Turn-on time, T_A = 25 °C, V_S = 40 V | TI datasheet, p. 14 — 5.7 Electrical Characteristics for TL07xH (continued) |
| settling time | — | 630 ns | — | ts; FREQUENCY RESPONSE | TI datasheet, p. 13 — 5.7 Electrical Characteristics for TL07xH |
| channel count | — | 4 | — | TI datasheet, p. 1 — Device Information |
TL074H frequently asked questions
What is the absolute maximum current for the TL074H?
The absolute maximum current is 10 mA.
What is the channel count of the TL074H?
The channel count is 4.
What is the CMRR when the input voltage range is considered at TA = -40°C to +125°C?
The CMRR is 105 dB at TA = -40°C to +125°C with the input voltage range considered.
What is the gain bandwidth product of the TL074H under FREQUENCY RESPONSE conditions?
The gain bandwidth product is 5.25 MHz.
What is the input bias current (ib) for the TL074H?
The input bias current (ib) is 1 pA.
What is the input offset current (ios) for the TL074H under the condition of input bias current?
The input offset current (ios) is 500 fA.
What is the input offset voltage of the TL074H at TA = -40°C to +125°C with psrr and OFFSET VOLTAGE conditions?
The input offset voltage is 1 µV.
What is the input offset voltage drift for the TL074H over the temperature range of TA = -40°C to +125°C?
The input offset voltage drift is 2 µV/°C.
What is the input voltage noise density (en) of the TL074H?
The input voltage noise density (en) is 37 nV/√Hz.
What is the maximum operating temperature for the TL074H under the condition TL07xM; ta; over operating ambient temperature range (unless otherwise noted)?
The operating temperature is 125 °C.
What is the output current (isc; OUTPUT) for the TL074H?
The output current (isc; OUTPUT) for the TL074H is 26 mA.
What is the PSRR specification for the TL074H?
The PSRR is 120 dB when VS = 5 V to 40 V, VCM = VS/2, and TA = -40 to +125 C.
TL074M datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.4 mA | 2.5 mA | iq | TI datasheet, p. 16 |
| supply voltage range | 10 V | — | 30 V | All NS and PS packages; All TL07xM devices(1); vs(vcc-); over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| abs max current (abs max) | -10 mA | — | 10 mA | TI datasheet, p. 10 — 5.1 Absolute Maximum Ratings | |
| input offset voltage drift | — | 2 µV/°C | — | TI datasheet, p. 1 | |
| cmrr | — | 86 dB | — | V_CC = ±15 V, R_L = 10 kΩ, T_A = 25 °C (typical curve) | TI datasheet, p. 25 |
| operating temperature | -55 °C | — | 125 °C | TL07xM; ta; over operating ambient temperature range (unless otherwise noted) | TI datasheet, p. 11 — over operating ambient temperature range (unless otherwise noted) |
| input bias current | — | 80 pA | — | T_A = 25 °C (typical curve) | TI datasheet, p. 24 |
| slew rate | 5 V/µs | 20 V/µs | — | VI = 10 V, CL = 100 pF, RL = 2 kΩ; TL07xM; AC | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| input voltage noise density | — | 18 nV/√Hz | — | All PS and NS packages, all TL07xM devices; RS = 20 Ω, f = 1 kHz; en; AC | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| response time | — | 100 ns | — | Settling time, VI = 20 V, CL = 100 pF, RL = 2 kOhm | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| settling time | — | 100 ns | — | VI = 20 V, CL = 100 pF, RL = 2 kΩ; ts; AC | TI datasheet, p. 16 — 5.9 Electrical Characteristics (AC) for TL07xC, TL07xC, TL07xC, TL07xl, T… |
| channel count | — | 4 | — | TI datasheet, p. 1 — Device Information |
TL074M frequently asked questions
What is the absolute maximum current rating for the TL074M?
The absolute maximum current is 10 mA.
What is the channel count of the TL074M?
The channel count is 4.
What is the common-mode rejection ratio (CMRR) of the TL074M?
The CMRR is 86 dB at V_CC = ±15 V, R_L = 10 kΩ, and T_A = 25 °C.
What is the typical input bias current of the TL074M at T_A = 25 °C?
The typical input bias current is 80 pA at T_A = 25 °C.
What is the input offset voltage drift for the TL074M?
The input offset voltage drift is 2 µV/°C.
What is the input voltage noise density for all PS and NS packages and all TL07xM devices with RS = 20 Ω at f = 1 kHz?
The input voltage noise density is 18 nV/√Hz.
What is the maximum operating temperature for the TL074M?
The operating temperature is 125 °C for the TL07xM at ta over the operating ambient temperature range (unless otherwise noted).
What is the quiescent current (iq) of the TL074M?
The quiescent current (iq) is 1.4 mA.
What is the response time of the TL074M?
The response time is 100 ns at Settling time, VI = 20 V, CL = 100 pF, RL = 2 kOhm.
What is the settling time of the TL074M under the conditions of VI = 20 V, CL = 100 pF, and RL = 2 kΩ?
The settling time is 100 ns.
What is the slew rate of the TL074M when VI = 10 V, CL = 100 pF, RL = 2 kΩ, TL07xM, AC?
The slew rate is 20 V/µs.
What is the supply voltage range for all NS and PS packages and all TL07xM devices over the operating ambient temperature range?
The supply voltage range is 30 V.