OP07
Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.
What the OP07 family does
The OP07x family comprises precision operational amplifiers available as the OP07, OP07C, and OP07D variants. These chopperless, bipolar-input devices operate on a wide supply range of ±3 V to ±18 V and tolerate input voltages from 0 V to ±14 V. Key specifications include low noise, long-term stability, and extremely high input impedances maintained across the full temperature range. Engineers typically select these amplifiers for analog input modules, battery testing, laboratory instrumentation, and temperature transmitters where low offset and high common-mode rejection are critical. The design eliminates the need for external offset nulling components in most applications.
OP07C datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.5 mA | — | P_D = 80 mW at V_S = ±15 V, no load | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| supply voltage range | 6 V | — | 36 V | Single supply; vs; 6.3 Recommended Operating Conditions | TI datasheet, p. 4 — 6.3 Recommended Operating Conditions |
| input offset voltage drift | — | 500 nV/°C | — | TA = 0°C to 70°C; OP07C; OFFSET VOLTAGE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| input offset voltage | — | 60 µV | — | OP07C; vos; OFFSET VOLTAGE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| gain bandwidth | 400 kHz | 600 kHz | — | FREQUENCY RESPONSE | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| cmrr | — | 97 dB | 120 dB | OP07C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| operating temperature | 0 °C | — | 70 °C | ta; 6.3 Recommended Operating Conditions | TI datasheet, p. 4 — 6.3 Recommended Operating Conditions |
| power dissipation | — | 80 mW | 150 mW | No load; p; POWER SUPPLY | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| input offset current | — | 800 pA | — | OP07C; ios; INPUT BIAS CURRENT | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| input bias current | — | 1.8 nA | — | OP07C; ib; INPUT BIAS CURRENT | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| slew rate | — | 0.3 V/µs | — | V_S = 5 V, R_L = 2 kΩ | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| psrr | — | 7 µdB | — | V_S = ±3 V to ±18 V | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| input voltage noise density | — | 10.5 nV/√Hz | — | f = 10 Hz; en; NOISE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| channel count | — | 1 | — | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
OP07C frequently asked questions
What is the channel count of the OP07C?
The channel count is 1.
What is the CMRR of the OP07C with respect to the input voltage range?
The CMRR is 97 dB.
What is the gain bandwidth of the OP07C under FREQUENCY RESPONSE conditions?
The gain bandwidth is 600 kHz.
What is the input bias current for the OP07C?
The input bias current is 1.8 nA.
What is the input offset current for the OP07C?
The input offset current is 800 pA.
What is the input offset voltage for the OP07C?
The input offset voltage is 60 µV for the OP07C; vos; OFFSET VOLTAGE.
What is the input offset voltage drift for the OP07C at TA = 0°C to 70°C?
The input offset voltage drift is 500 nV/°C.
What is the input voltage noise density of the OP07C at f = 10 Hz?
The input voltage noise density is 10.5 nV/√Hz at f = 10 Hz.
What is the maximum operating temperature (ta) for the OP07C?
The maximum operating temperature (ta) is 70 °C.
What is the power dissipation of the OP07C under no load with power supply?
The power dissipation is 80 mW.
What is the PSRR of the OP07C when V_S = ±3 V to ±18 V?
The PSRR is 7 µdB when V_S = ±3 V to ±18 V.
What is the quiescent current of the OP07C?
The quiescent current is 1.5 mA at P_D = 80 mW at V_S = ±15 V, no load.
OP07D datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.5 mA | — | P_D = 80 mW at V_S = ±15 V, no load | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| supply voltage range | 6 V | — | 36 V | Single supply; vs; 6.3 Recommended Operating Conditions | TI datasheet, p. 4 — 6.3 Recommended Operating Conditions |
| input offset voltage drift | — | — | 2.5 µV/°C | TA = 0°C to 70°C; OP07D; OFFSET VOLTAGE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| input offset voltage | — | — | 150 µV | OP07D; vos; OFFSET VOLTAGE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| gain bandwidth | 400 kHz | 600 kHz | — | FREQUENCY RESPONSE | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| cmrr | — | 94 dB | 106 dB | OP07D; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| operating temperature | 0 °C | — | 70 °C | ta; 6.3 Recommended Operating Conditions | TI datasheet, p. 4 — 6.3 Recommended Operating Conditions |
| power dissipation | — | 80 mW | 150 mW | No load; p; POWER SUPPLY | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| input offset current | — | — | 6 nA | OP07D; ios; INPUT BIAS CURRENT | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| input bias current | — | — | 12 nA | OP07D; ib; INPUT BIAS CURRENT | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| slew rate | — | 0.3 V/µs | — | V_S = 5 V, R_L = 2 kΩ | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| psrr | — | 7 µdB | — | V_S = ±3 V to ±18 V | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| input voltage noise density | — | 10.5 nV/√Hz | — | f = 10 Hz; en; NOISE | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| channel count | — | 1 | — | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
OP07D frequently asked questions
What is the channel count of the OP07D?
The channel count is 1.
What is the CMRR of the OP07D within the INPUT VOLTAGE RANGE?
The CMRR is 94 dB.
What is the gain bandwidth under FREQUENCY RESPONSE conditions?
The gain bandwidth is 600 kHz.
What is the input bias current for the OP07D?
The input bias current is 12 nA.
What is the input offset current for the OP07D?
The input offset current is 6 nA.
What is the input offset voltage for the OP07D?
The input offset voltage is 150 µV.
What is the input offset voltage drift for the OP07D at TA = 0°C to 70°C?
The input offset voltage drift is 2.5 µV/°C.
What is the input voltage noise density of the OP07D at f = 10 Hz?
The input voltage noise density is 10.5 nV/√Hz.
What is the maximum operating temperature (ta) for the OP07D?
The maximum operating temperature (ta) is 70 °C.
What is the power dissipation of the OP07D under no load conditions with power supply?
The power dissipation is 80 mW.
What is the PSRR of the OP07D when V_S = ±3 V to ±18 V?
The PSRR is 7 µdB when V_S = ±3 V to ±18 V.
What is the quiescent current of the OP07D?
The quiescent current is 1.5 mA at P_D = 80 mW at V_S = ±15 V, no load.
OP07 datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 1.5 mA | — | P_D = 80 mW at V_S = ±15 V, no load | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| supply voltage range | 6 V | — | 36 V | Single supply; vs; 6.3 Recommended Operating Conditions | TI datasheet, p. 4 — 6.3 Recommended Operating Conditions |
| gain bandwidth | 400 kHz | 600 kHz | — | FREQUENCY RESPONSE | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| operating temperature | 0 °C | — | 70 °C | ta; 6.3 Recommended Operating Conditions | TI datasheet, p. 4 — 6.3 Recommended Operating Conditions |
| power dissipation | — | 80 mW | 150 mW | No load; p; POWER SUPPLY | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| slew rate | — | 0.3 V/µs | — | V_S = 5 V, R_L = 2 kΩ | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
| psrr | — | 7 µdB | — | V_S = ±3 V to ±18 V | TI datasheet, p. 5 — 6.5 Electrical Characteristics |
| channel count | — | 1 | — | TI datasheet, p. 6 — 6.5 Electrical Characteristics (continued) |
OP07 frequently asked questions
What is the channel count of the OP07?
The channel count is 1.
What is the gain bandwidth of the OP07 under FREQUENCY RESPONSE conditions?
The gain bandwidth is 600 kHz.
What is the operating temperature of the OP07 under ta; 6.3 Recommended Operating Conditions?
The operating temperature is 70 °C.
What is the power dissipation of the OP07 under no load and power supply conditions?
The power dissipation is 80 mW.
What is the PSRR of the OP07 when V_S = ±3 V to ±18 V?
The PSRR is 7 µdB.
What is the quiescent current of the OP07 when P_D = 80 mW at V_S = ±15 V with no load?
The quiescent current is 1.5 mA.
What is the slew rate of the OP07 when V_S = 5 V and R_L = 2 kΩ?
The slew rate is 0.3 V/µs.
What is the supply voltage range for the OP07 under single supply conditions?
The supply voltage range is 36 V.