TLV900
Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.
What the TLV900 family does
The TLV900x family includes single, dual, and quad low-power operational amplifiers with rail-to-rail input and output. These devices operate across 1.8 V to 5.5 V supplies and feature a unity-gain bandwidth of 1 MHz. They offer a low input offset voltage of ±0.4 mV, low input bias current of 5 pA, and low quiescent current of 60 µA per channel. The family supports shutdown modes for the 'S' variants, consuming less than 1 µA in standby. Engineers typically use these amplifiers for sensor signal conditioning, active filters, and current sensing in cost-sensitive, space-constrained applications like smoke detectors and wearable electronics.
TLV9001 datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 60 µA | — | 60 µA/Ch | TI datasheet, p. 1 |
| output current | — | 40 mA | — | VS = 5.5 V; isc; OUTPUT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| supply voltage range | 1.8 V | — | 5.5 V | vs; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset voltage drift | — | 600 nV/°C | — | TA = -40°C to 125°C (dVOS/dT, ±0.6 µV/°C) | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input offset voltage | — | 400 µV | 1.6 mV | VS = 5 V; vos; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| gain bandwidth | — | 1 MHz | — | VS = 5 V; gbw; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| cmrr | 63 dB | 77 dB | — | VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| operating temperature | -40 °C | — | 125 °C | ta; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset current | — | 2 pA | — | ios; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input bias current | — | 5 pA | — | VS = 5 V; ib; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input capacitance | — | 5 pF | — | INPUT CAPACITANCE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| slew rate | — | 2 V/µs | — | VS = 5 V; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| psrr | 80 dB | 105 dB | — | VS = 1.8 to 5.5 V, VCM = (V-); psrr; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input voltage noise density | — | 30 nV/√Hz | — | f = 1 kHz, VS = 5 V; en; NOISE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| response time | — | 850 ns | — | overload recovery time, approximately 850 ns | TI datasheet, p. 27 |
| settling time | — | 2.5 µs | — | To 0.1%, VS = 5 V, 2-V step, G = +1, CL = 100 pF; ts; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| channel count | — | 1 | — | TI datasheet, p. 1 |
TLV9001 frequently asked questions
What is the channel count of the TLV9001?
The channel count is 1.
What is the CMRR for the TLV9001 under the condition VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C?
The CMRR is 77 dB.
What is the gain bandwidth of the TLV9001 when VS = 5 V?
The gain bandwidth is 1 MHz.
What is the input bias current when VS = 5 V?
The input bias current is 5 pA when VS = 5 V.
What is the input capacitance?
The input capacitance is 5 pF.
What is the input offset current (ios) under the condition of input bias current?
The input offset current (ios) is 2 pA.
What is the input offset voltage (vos) when VS = 5 V?
The input offset voltage is 400 µV.
What is the input offset voltage drift (dVOS/dT) for the TLV9001?
The input offset voltage drift is 600 nV/°C at TA = -40°C to 125°C.
What is the input voltage noise density at f = 1 kHz with VS = 5 V?
The input voltage noise density is 30 nV/√Hz.
What is the maximum operating temperature (ta) according to section 7.3 Recommended Operating Conditions?
The maximum operating temperature (ta) is 125 °C.
What is the output current when VS = 5.5 V and the output is short-circuited?
The output current is 40 mA.
What is the PSRR when VS = 1.8 to 5.5 V, VCM = (V-); psrr; OFFSET VOLTAGE?
The PSRR is 105 dB when VS = 1.8 to 5.5 V, VCM = (V-); psrr; OFFSET VOLTAGE.
TLV9001S datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 60 µA | — | 60 µA/Ch | TI datasheet, p. 1 |
| output current | — | 40 mA | — | VS = 5.5 V; isc; OUTPUT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| supply voltage range | 1.8 V | — | 5.5 V | vs; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset voltage drift | — | 600 nV/°C | — | TA = -40°C to 125°C (dVOS/dT, ±0.6 µV/°C) | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input offset voltage | — | 400 µV | 1.6 mV | VS = 5 V; vos; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| gain bandwidth | — | 1 MHz | — | VS = 5 V; gbw; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| cmrr | 63 dB | 77 dB | — | VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| operating temperature | -40 °C | — | 125 °C | ta; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset current | — | 2 pA | — | ios; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input bias current | — | 5 pA | — | VS = 5 V; ib; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input capacitance | — | 5 pF | — | INPUT CAPACITANCE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| slew rate | — | 2 V/µs | — | VS = 5 V; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| psrr | 80 dB | 105 dB | — | VS = 1.8 to 5.5 V, VCM = (V-); psrr; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input voltage noise density | — | 30 nV/√Hz | — | f = 1 kHz, VS = 5 V; en; NOISE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| response time | — | 850 ns | — | overload recovery time, approximately 850 ns | TI datasheet, p. 27 |
| settling time | — | 2.5 µs | — | To 0.1%, VS = 5 V, 2-V step, G = +1, CL = 100 pF; ts; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| channel count | — | 1 | — | TI datasheet, p. 1 |
TLV9001S frequently asked questions
What is the channel count of the TLV9001S?
The channel count is 1.
What is the CMRR for the TLV9001S when VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, and TA = -40°C to 125°C?
The CMRR is 77 dB.
What is the gain bandwidth of the TLV9001S at VS = 5 V?
The gain bandwidth is 1 MHz at VS = 5 V.
What is the input bias current when VS = 5 V?
The input bias current is 5 pA.
What is the input capacitance?
The input capacitance is 5 pF.
What is the input offset current (ios) under the input bias current condition?
The input offset current (ios) is 2 pA.
What is the input offset voltage (vos) when VS = 5 V?
The input offset voltage is 400 µV.
What is the input offset voltage drift (dVOS/dT) for the TLV9001S over the temperature range TA = -40°C to 125°C?
The input offset voltage drift is 600 nV/°C (±0.6 µV/°C) at TA = -40°C to 125°C.
What is the input voltage noise density of the TLV9001S at f = 1 kHz with VS = 5 V?
The input voltage noise density is 30 nV/√Hz.
What is the maximum operating temperature (ta) specified in the Recommended Operating Conditions?
The operating temperature is 125 °C.
What is the output current when VS = 5.5 V and the output is short-circuited?
The output current is 40 mA.
What is the PSRR when VS = 1.8 to 5.5 V and VCM = (V-)?
The PSRR is 105 dB.
TLV9002 datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 60 µA | — | 60 µA/Ch | TI datasheet, p. 1 |
| output current | — | 40 mA | — | VS = 5.5 V; isc; OUTPUT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| supply voltage range | 1.8 V | — | 5.5 V | vs; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset voltage drift | — | 600 nV/°C | — | TA = -40°C to 125°C (dVOS/dT, ±0.6 µV/°C) | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input offset voltage | — | 400 µV | 1.6 mV | VS = 5 V; vos; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| gain bandwidth | — | 1 MHz | — | VS = 5 V; gbw; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| cmrr | 63 dB | 77 dB | — | VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| operating temperature | -40 °C | — | 125 °C | ta; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset current | — | 2 pA | — | ios; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input bias current | — | 5 pA | — | VS = 5 V; ib; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input capacitance | — | 5 pF | — | INPUT CAPACITANCE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| slew rate | — | 2 V/µs | — | VS = 5 V; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| psrr | 80 dB | 105 dB | — | VS = 1.8 to 5.5 V, VCM = (V-); psrr; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input voltage noise density | — | 30 nV/√Hz | — | f = 1 kHz, VS = 5 V; en; NOISE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| response time | — | 850 ns | — | overload recovery time, approximately 850 ns | TI datasheet, p. 27 |
| settling time | — | 2.5 µs | — | To 0.1%, VS = 5 V, 2-V step, G = +1, CL = 100 pF; ts; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| channel count | — | 2 | — | TI datasheet, p. 1 |
TLV9002 frequently asked questions
How many channels does the TLV9002 have?
The TLV9002 has 2 channels.
What is the CMRR for the TLV9002 under the condition VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C?
The CMRR is 77 dB.
What is the gain bandwidth of the TLV9002?
The gain bandwidth is 1 MHz at VS = 5 V under FREQUENCY RESPONSE conditions.
What is the input bias current when VS = 5 V?
The input bias current is 5 pA.
What is the input capacitance of the TLV9002?
The input capacitance is 5 pF.
What is the input offset current (ios) when the input bias current is specified?
The input offset current (ios) is 2 pA.
What is the input offset voltage (vos) when VS = 5 V?
The input offset voltage is 400 µV.
What is the input offset voltage drift (dVOS/dT) for the TLV9002?
The input offset voltage drift is 600 nV/°C at TA = -40°C to 125°C.
What is the input voltage noise density at f = 1 kHz, VS = 5 V?
The input voltage noise density is 30 nV/√Hz.
What is the maximum operating temperature (ta) specified in section 7.3 Recommended Operating Conditions?
The maximum operating temperature (ta) is 125 °C.
What is the output current when VS = 5.5 V and the output is short-circuited?
The output current is 40 mA.
What is the PSRR offset voltage specification?
The PSRR offset voltage is 105 dB at VS = 1.8 to 5.5 V, VCM = (V-).
TLV9002S datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 60 µA | — | 60 µA/Ch | TI datasheet, p. 1 |
| output current | — | 40 mA | — | VS = 5.5 V; isc; OUTPUT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| supply voltage range | 1.8 V | — | 5.5 V | vs; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset voltage drift | — | 600 nV/°C | — | TA = -40°C to 125°C (dVOS/dT, ±0.6 µV/°C) | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input offset voltage | — | 400 µV | 1.6 mV | VS = 5 V; vos; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| gain bandwidth | — | 1 MHz | — | VS = 5 V; gbw; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| cmrr | 63 dB | 77 dB | — | VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| operating temperature | -40 °C | — | 125 °C | ta; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset current | — | 2 pA | — | ios; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input bias current | — | 5 pA | — | VS = 5 V; ib; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input capacitance | — | 5 pF | — | INPUT CAPACITANCE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| slew rate | — | 2 V/µs | — | VS = 5 V; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| psrr | 80 dB | 105 dB | — | VS = 1.8 to 5.5 V, VCM = (V-); psrr; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input voltage noise density | — | 30 nV/√Hz | — | f = 1 kHz, VS = 5 V; en; NOISE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| response time | — | 850 ns | — | overload recovery time, approximately 850 ns | TI datasheet, p. 27 |
| settling time | — | 2.5 µs | — | To 0.1%, VS = 5 V, 2-V step, G = +1, CL = 100 pF; ts; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| channel count | — | 2 | — | TI datasheet, p. 1 |
TLV9002S frequently asked questions
How many channels does the TLV9002S have?
The TLV9002S has a channel count of 2.
What is the CMRR for the TLV9002S under the condition VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C?
The CMRR is 77 dB.
What is the gain bandwidth of the TLV9002S?
The gain bandwidth is 1 MHz at VS = 5 V under FREQUENCY RESPONSE conditions.
What is the input bias current when VS = 5 V?
The input bias current is 5 pA at VS = 5 V.
What is the input capacitance?
The input capacitance is 5 pF.
What is the input offset current?
The input offset current is 2 pA under the condition of ios; INPUT BIAS CURRENT.
What is the input offset voltage (vos) when VS = 5 V?
The input offset voltage is 400 µV.
What is the input offset voltage drift (dVOS/dT) for the TLV9002S over the temperature range TA = -40°C to 125°C?
The input offset voltage drift is 600 nV/°C (±0.6 µV/°C) for TA = -40°C to 125°C.
What is the input voltage noise density of the TLV9002S at f = 1 kHz with VS = 5 V?
The input voltage noise density is 30 nV/√Hz.
What is the maximum operating temperature (ta) according to section 7.3 Recommended Operating Conditions?
The maximum operating temperature (ta) is 125 °C.
What is the output current when VS = 5.5 V and isc; OUTPUT?
The output current is 40 mA.
What is the PSRR when VS = 1.8 to 5.5 V and VCM = (V-)?
The PSRR is 105 dB.
TLV9004 datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 60 µA | — | 60 µA/Ch | TI datasheet, p. 1 |
| output current | — | 40 mA | — | VS = 5.5 V; isc; OUTPUT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| supply voltage range | 1.8 V | — | 5.5 V | vs; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset voltage drift | — | 600 nV/°C | — | TA = -40°C to 125°C (dVOS/dT, ±0.6 µV/°C) | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input offset voltage | — | 400 µV | 1.6 mV | VS = 5 V; vos; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| gain bandwidth | — | 1 MHz | — | VS = 5 V; gbw; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| cmrr | 63 dB | 77 dB | — | VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, TA = -40°C to 125°C; cmrr; INPUT VOLTAGE RANGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| operating temperature | -40 °C | — | 125 °C | ta; 7.3 Recommended Operating Conditions | TI datasheet, p. 14 — 7.3 Recommended Operating Conditions |
| input offset current | — | 2 pA | — | ios; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input bias current | — | 5 pA | — | VS = 5 V; ib; INPUT BIAS CURRENT | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input capacitance | — | 5 pF | — | INPUT CAPACITANCE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| slew rate | — | 2 V/µs | — | VS = 5 V; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| psrr | 80 dB | 105 dB | — | VS = 1.8 to 5.5 V, VCM = (V-); psrr; OFFSET VOLTAGE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| input voltage noise density | — | 30 nV/√Hz | — | f = 1 kHz, VS = 5 V; en; NOISE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| response time | — | 850 ns | — | overload recovery time, approximately 850 ns | TI datasheet, p. 27 |
| settling time | — | 2.5 µs | — | To 0.1%, VS = 5 V, 2-V step, G = +1, CL = 100 pF; ts; FREQUENCY RESPONSE | TI datasheet, p. 17 — 7.10 Electrical Characteristics |
| channel count | — | 4 | — | TI datasheet, p. 1 |
TLV9004 frequently asked questions
How many channels does the TLV9004 have?
The TLV9004 has 4 channels.
What is the CMRR for the TLV9004 when VS = 5.5 V, (V-) - 0.1 V < VCM< (V+) + 0.1 V, and TA = -40°C to 125°C?
The CMRR is 77 dB.
What is the gain bandwidth of the TLV9004?
The gain bandwidth is 1 MHz at VS = 5 V under FREQUENCY RESPONSE conditions.
What is the input bias current when VS = 5 V?
The input bias current is 5 pA.
What is the input capacitance of the TLV9004?
The input capacitance is 5 pF.
What is the input offset current (ios) under the input bias current condition?
The input offset current (ios) is 2 pA under the input bias current condition.
What is the input offset voltage (vos) when VS = 5 V?
The input offset voltage is 400 µV.
What is the input offset voltage drift (dVOS/dT) for the TLV9004 over the temperature range TA = -40°C to 125°C?
The input offset voltage drift is 600 nV/°C.
What is the input voltage noise density of the TLV9004 at f = 1 kHz with VS = 5 V?
The input voltage noise density is 30 nV/√Hz.
What is the maximum operating temperature (ta) specified in the Recommended Operating Conditions?
The operating temperature is 125 °C.
What is the output current when VS = 5.5 V and the output is short-circuited?
The output current is 40 mA.
What is the PSRR for the TLV9004 when VS = 1.8 to 5.5 V and VCM = (V-)?
The PSRR is 105 dB.