74HC00
Every spec below is cited to the manufacturer datasheet. Pick your exact ordering code, compare the closest alternatives, then ask the assistant what it means for your design.
What the 74HC00 family does
The 74HC00 and 74HCT00 are quad 2-input NAND gates available in SO14, TSSOP14, and DHVQFN14 packages across commercial and industrial temperature ranges. These devices operate with a wide supply voltage from 2.0 to 6.0 V, featuring CMOS low power dissipation and high noise immunity. Input levels differ between the HC and HCT variants, with the latter supporting TTL levels. The gates include clamp diodes to allow current limiting resistors for interfacing inputs to voltages exceeding VCC. They are typically used in digital logic circuits requiring robust noise immunity and latch-up performance exceeding 100 mA per JESD 78 Class II Level B standards.
74HC00 datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 150 µA | — | per input pin; VI = VCC- 2.1 V; IO = 0 A; other inputs at VCCor GND; VCC = 4.5 V to 5.5 V; 9. Static characteristics | Nexperia datasheet, p. 5 — 9. Static characteristics |
| output current (abs max) | — | — | 25 mA | -0.5 V < VO< VCC+ 0.5 V; io; Limiting values | Nexperia datasheet, p. 3 — Table 4. Limiting values |
| supply voltage range | 2 V | 5 V | 6 V | vcc; Recommended operating conditions | Nexperia datasheet, p. 3 — Table 5. Recommended operating conditions |
| operating temperature | -40 °C | 25 °C | 125 °C | tamb; Recommended operating conditions | Nexperia datasheet, p. 3 — Table 5. Recommended operating conditions |
| power dissipation (abs max) | — | — | 500 mW | [2]; ptot; Limiting values | Nexperia datasheet, p. 3 — Table 4. Limiting values |
| input capacitance | — | 3.5 pF | — | ci; 74HC00 | Nexperia datasheet, p. 4 — Table 6. Static characteristics |
| propagation delay | — | 25 ns | — | VCC = 2.0 V; tpd; 74HC00 | Nexperia datasheet, p. 5 — Table 7. Dynamic characteristics |
| output voltage high | — | 2 V | — | IO = -20 µA; VCC = 2.0 V; voh; 74HC00 | Nexperia datasheet, p. 4 — Table 6. Static characteristics |
| output voltage low | — | 150 mV | — | IO = 4.0 mA; VCC = 4.5 V; vol; 74HC00 | Nexperia datasheet, p. 4 — Table 6. Static characteristics |
74HCT00 datasheet parameters
| Parameter | Min | Typ | Max | Conditions | Source |
|---|---|---|---|---|---|
| quiescent current | — | 150 µA | — | per input pin; VI = VCC- 2.1 V; IO = 0 A; other inputs at VCCor GND; VCC = 4.5 V to 5.5 V; 9. Static characteristics | Nexperia datasheet, p. 5 — 9. Static characteristics |
| output current (abs max) | — | — | 25 mA | -0.5 V < VO< VCC+ 0.5 V; io; Limiting values | Nexperia datasheet, p. 3 — Table 4. Limiting values |
| supply voltage range | 4.5 V | 5 V | 5.5 V | vcc; Recommended operating conditions | Nexperia datasheet, p. 3 — Table 5. Recommended operating conditions |
| operating temperature | -40 °C | 25 °C | 125 °C | tamb; Recommended operating conditions | Nexperia datasheet, p. 3 — Table 5. Recommended operating conditions |
| power dissipation (abs max) | — | — | 500 mW | [2]; ptot; Limiting values | Nexperia datasheet, p. 3 — Table 4. Limiting values |
| input capacitance | — | 3.5 pF | — | ci; 74HC00 | Nexperia datasheet, p. 4 — Table 6. Static characteristics |
| propagation delay | — | 25 ns | — | VCC = 2.0 V; tpd; 74HC00 | Nexperia datasheet, p. 5 — Table 7. Dynamic characteristics |
| output voltage high | — | 2 V | — | IO = -20 µA; VCC = 2.0 V; voh; 74HC00 | Nexperia datasheet, p. 4 — Table 6. Static characteristics |
| output voltage low | — | 150 mV | — | IO = 4.0 mA; VCC = 4.5 V; vol; 74HC00 | Nexperia datasheet, p. 4 — Table 6. Static characteristics |